Converting 2 potential-free inputs which should be close permanently (switches) to RF signal.
Description
- RFIM-20B: the wireless contact converter changes your existing button / switch to a wireless one.
- two inputs enable control of two units independent.
- battery power supply (3 V / CR2477 - included in the supply) with battery life of around 5 years based on frequency of use.
- contact can be permanently closed (does not drain on the battery).
- It can be used to transmit information on switching on the contact (detector, button, technology, logic output).
-
The BOX design lets you mount it right in an installation box under the button or switch.
-
When pressing the button, it sends a set signal (ON/OFF, dimming, time switching OFF / ON, blinds up/down).
-
Sending a command is indicated by a red LED.
-
Option of setting light scenes, where with a single press, you can control multiple units of iNELS RF Control.
-
Range up to 200 m (in open space), if the signal is insuffi cient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
-
Communication frequency with bidirectional protocol iNELS RF Control.
Technical parameters
- Supply voltage: 1x 3 V baterry CR 2477
- Transmission indication / function: orange LED
- Number of inputs: 2
- Transmitter frequency: 866 MHz, 868 MHz, 916 MHz
- Range in free space: up to 200 m
- Operating temperature: -10 to +50 °C
- Operating position: any
- Protection: IP30
- Contamination degree: 2
- Dimensions: 49 x 49 x 13 mm
- Inputs:2 Inputs
- Range:200 m
- Dimension (mm):49 x 49 x13
- Package:1
- Type:RFIM - 20B